HP Driver > Resources > Fix Inkjet Printer Problems of Three Representative One

Troubleshoot Three Representative Inkjet Printer Problems

Due to low cost and high output quality, Inkjet printer have been widely used in office and at home as well. However, we have been faced many Inkjet printer problems such as poor output quality, printer not printing as the like from time to time. Worse still, many of the common users are so poor in professional computer knowledge that they are only at loss when the Inkjet printer problems troubled their printer life. Therefore, here we will committed to troubleshooting Inkjet printers for you with the following professional knowledge.

Inkjet printer problems: Printer doesn't respond at all after the printer is turned on.

Troubleshooting solutions: On one hand, poor power supply and insecure cord connection may result in this problem. Such the case being, you should close the printer to observe whether power supply is normal or not and whether there is voltage output of switching power supply. And then reconnect the power cord to ascertain the plug has been firmly inserted.

On the other hand, damaged and impaired inkjet printer power supply circuitry can also lead to this kind of Inkjet printer problem. Under such a circumstance, switch tube, thick film piece, zener diode and three-terminal regulator should be attached into great importance.

Inkjet printer problems: Printer cannot respond to any command from you or printer cannot print even when printer light is on.

Troubleshooting solutions: The total amount of waste ink in printer counter has reached to the maximal limit so that printer cannot respond to any command at all. Generally, having the printer head cleaned the waste ink, waste ink pads will absorb those waste simultaneously. Meanwhile, the amount of consumed printer ink during this process will be controlled by the motherboard and accumulated by the printer counter. Therefore, when the maximal limit has been reached, the inkjet printer won’t work any more. And you should replace the current waster ink pad with the brand new one and reset the printer counter in case that the overloaded waste ink will penetrate into the inner part of your Inkjet printer.

Furthermore, improper settings of printer port, overloaded printed documents, insecure or open data cable connection can be also blamed for this Inkjet printer problem. Accordingly, you should click "LPTl" – "Port Settings" to set the current printer port in correct mode, reduce printer speed and resolution for those complicated documents and so on to prevent exceeding printer memory, and plug the data cable once again or change it to make sure it can be plugged firmly.

Inkjet printer problems: Printer word car has been moving forth and back without regular frequency and even it will hit the machine frame at random.

Troubleshooting solutions: The dirt attached to the rail of frequency word car is so much that the lubrication movements of the rail is poor. And the accumulated mixture of dirt, scrapes of paper and the rail card oil will force the printer head not to work due to the growing resistance over time, thus causing the printer head crash. And in order to troubleshoot the Inkjet printer problem, you can clean the rail with the soft cloth damped with ethanol, and then add a few drops of lubricating oil having the ethanol being volatile.

Photoelectric sensor has been damaged or dirty can also invoke such a Inkjet printer problem. Because photoelectric sensor in the position of printer carriage stop is a vital component of the resetting signal transmitted from the printer motherboard to the printer car. And if it has been damaged, the printer car cannot receive the returning signal so that it will be forward towards the frame. Such the case being, you should clean the photoelectric sensor with soft cloth or cotton damped with ethanol. And worse still, the current photoelectric sensor has to be replaced imperatively for troubleshooting Inkjet printers.

And also, malfunctioned or invalidated Inkjet printer Drivers will intrigue this Inkjet printer problem. Therefore, HP Drivers software of Driver Detective is highly recommended to you to optimize and modify your printers drivers to the optimal states automatically and professionally in order to enjoy a smooth and secure Inkjet printer life.

Related Articles: How to Troubleshoot Garbage Printing, Printer Troubleshooting for Representative Problems, HP LaserJet 1018 Drivers